Rain Barrel Gutter Diverter – Easy Water Collection Fit

Every time it rains, thousands of litres of usable water run straight off your roof and disappear down the drain. If you've got a rain barrel sitting in the garden and a gutter running right above it, this diverter is the missing piece between wasted water and a full barrel.

How it solves the problem

The diverter fits directly into a square cutout in your existing downpipe or gutter run — no need to slice the whole thing apart or buy a new gutter system. You cut one square hole, press this piece into place, seal around it, and you're done. Rainwater gets redirected into your barrel automatically whenever it rains. No funnels taped to the side, no awkward hoses hanging off the edge, no makeshift solutions that fail the first time there's a proper downpour.

• Fits neatly into a square cutout in standard gutters
• Designed to seal tight with silicone and optional screws for a permanent fix
• Diverts flow straight into your barrel without splitting the gutter completely
• Works with round downpipes where a square hole can be cut into the flat face
• Compact profile — doesn't stick out or look makeshift from the street

The setup

Installation is straightforward: mark your square, cut it out with tin snips or a jigsaw, slide the diverter in, run a bead of silicone around the edge, and optionally drive a couple of sheet metal screws through the gutter wall to lock it in place. The fit is snug enough to hold position while the sealant cures. Most people are done in under an hour with basic tools.

Where it shines

This works best on horizontal gutter runs or the flat face of a downpipe where you want to tap off water flow without interrupting the rest of the system. Pair it with a short section of hose or pipe leading directly into your barrel and you've got a passive, zero-maintenance water collection setup that fills itself every time it rains. Ideal for garden watering, washing tools, or topping up an outdoor tap supply.

Arrives ready to install — just add silicone and a few screws.

Specifications

Design by JayBrews